An above-ground liner replacement runs $700 to $2,500 for the full job, and skipping the labour can save $250 to $800. Whether that is a good idea depends on the liner type, the wall condition and whether the warranty requires professional installation. This page covers all three.
What it costs in Mount Juliet
| Job | Published 2026 range |
|---|---|
| Above-ground liner, full job | $700 - $2,500 |
| 16 x 32 inground liner | $2,100 - $3,000 |
| 20 x 40 inground liner | $3,000 - $5,500 |
| Refill water | $60 - $350 city, $400 - $900 trucked |
| Wall, floor and gasket repairs | $100 - $3,000 depending on scope |
2026 cost structure
| Item | Cost |
|---|---|
| Liner material, above-ground | $500 - $900 |
| Installation labour | $250 - $800 |
| Full job | $700 - $2,500 |
| Refill water | $60 - $350 city, $400 - $900 trucked |
| Startup chemicals | $80 - $200 |
Above-ground pools are more DIY-friendly because there is no fabricated bead track or vermiculite floor to deal with, but wrinkles, bad cuts and leaks from a poor fit all shorten the liner's life.
Overlap, beaded or unibead
Most above-ground pools take an overlap liner ($150 to $600 in material), which drapes over the wall and is held by coping strips. They are forgiving to install and show folds at the waterline, and they typically last 5 to 9 years.
A beaded liner ($500 to $1,000) snaps into a receiver for a clean waterline and lasts 10 to 15 years. A unibead or J-hook liner ($200 to $900) can work either way, which is useful when the pool's configuration is uncertain.
Wall condition decides the job
On an above-ground pool the wall is thin steel or resin, and it is what the liner protects. Rust at the base, around the skimmer cut-out or along the top rail usually shows up when the old liner comes off. A wall that has lost its coating will keep eating liners, so cleaning, treating and coating the wall before the new liner goes in is not optional work.
The floor also matters: sand or foam cove that has washed out leaves the liner unsupported, and that is where punctures start.
Local note for Mount Juliet
Wilson County clay is the same slow-draining Nashville Basin mix, and it is why pools here are best drained and refilled in one pass.
Mount Juliet's drinking water comes from the independent West Wilson Utility District, which serves more than 33,000 customers. The city bills sewer only, using consumption the district reports to it - so the district is the number for filling a pool.
Utility accounts: West Wilson Utility District · (615) 758-5682
Checking a quote in Mount Juliet
- Who measures the pool, and who carries the risk if the fabricated liner does not fit?
- Is the liner type, bead system and mil thickness stated on the quote?
- Are wall, floor and gasket repairs itemised per area with photographs?
- Are water, chemicals and old liner disposal included or excluded?
- What is the workmanship warranty, separately from the manufacturer liner warranty?
Frequently asked questions
How much does an above-ground liner replacement cost?
$700 to $2,500 for the full job in 2026 published figures: $500 to $900 for material and $250 to $800 for labour, plus water and chemicals if included.
Can I install an above-ground liner myself?
Often yes. The labour saving is $250 to $800. Check whether the liner warranty requires professional installation, and be realistic about getting it set without wrinkles.
Do I have to drain the pool?
Yes. The liner is fitted to the wall, so the pool is drained, the old liner removed, the wall prepared and the new liner set before refilling.
